Macro setup

Discussion in 'Tutorials & Tips' started by Paton, Jun 19, 2020.

  1. Paton

    Paton New Member

    Joined:
    Jun 19, 2020
    Messages:
    7
    Equipment:
    Canon700D, Canon800D, Sigma 150x600 telephoto lens
    I have a Canon 700D and a Minolta 55mmx1.7 macro lens . Can I reverse fit this for macro and if so what fittings would I need.
    Thanks
     

  2. ThomasDelaney

    ThomasDelaney New Member

    Joined:
    May 1, 2020
    Messages:
    17
    Equipment:
    EOS R, G7X II, EOS M50
    A reversing ring with whatever filter thread that the lens has on one end, and an EF on the other.While this is a basic entry into macro photography, if you do like it, and want more control - (i.e. reversing the lens means the only reasonable way to focus is physically moving closer or further to your subject) then there are a number of different options, insects for example I'd always lean towards the longer focal length lenses as it gives you more distance between you and the subject, whilst giving up to life size reproduction on the sensor. If you are interested, then the folk on Canon Live Chat are really helpful if you haevany questions, should be able to get a hold of them here -
    https://www.canon.co.uk/canonlive/l...at
     
  3. Paton

    Paton New Member

    Joined:
    Jun 19, 2020
    Messages:
    7
    Equipment:
    Canon700D, Canon800D, Sigma 150x600 telephoto lens
    Thank you for the info.
     
    Last edited by a moderator: Jun 19, 2020
  4. Craig Sherriff

    Craig Sherriff Well-Known Member Site Supporter

    Joined:
    Apr 25, 2017
    Messages:
    3,171
    Location:
    Tasmania, Australia
    Equipment:
    60D, 10D, 50D 1dmark3, T70, AV1, lenses ranging from 28mm to 600 mm, canonet Junior, Canonet QL 25, Mamiya C3 and 3 lens sets,Mamiya 645 pro TL and 3 lenses. Pentax MG and various lenses, Toyoview 4 * 5 inch large format camera,Calimat C1 8*10 inch ultra large format camera.
    I have see this done on You Tube, I would suggest that you look at your lens and see what size the filter thread is. Purchase a EOS to what ever size it is. This will leave you with a female to female threaded holes.
    So invest in a male/ male thread adapter ring, the size of you lens thread.
    This will allow you to fit your lens to the camera backwards, then it would be a matter of playing around with it.
    You did not state what the lens mount was. If it is a EOS to M42, then again, you will need a M42 to what ever your lens filter thread size is, Male to Male adapter Ring.
    Lastly have a look a You Tube.
    Personally I would invest in some macro rings or macro extension tubes it is less confusing and easier to set up than reversal of the lens, you already have a macro lens this will add to the macro capability of the lens, get them cheap off of Ebay.
    All the best with it.
     
    Last edited: Jun 19, 2020
  5. Paton

    Paton New Member

    Joined:
    Jun 19, 2020
    Messages:
    7
    Equipment:
    Canon700D, Canon800D, Sigma 150x600 telephoto lens
    Thank you for the info.I will look into YouTube for other ideas too.
     
  6. johnsey

    johnsey Site Moderator Staff Member Site Supporter

    Joined:
    Apr 21, 2017
    Messages:
    2,120
    Location:
    Fargo, ND
    Equipment:
    5dMk4, 5dsR, 5dMk2, 20D, 70-200 2.8L IS, 100mm 2.8 Macro USM, 50mm 1.4, 85mm 1.8, 17-40mm 4.0L, TS-E 24mm 3.5L II, Rokinon 14mm 2.8; Pixma Pro-100
    Is this the 70's MC mount lens? I am not aware of a 55 1.7 Macro. So you can try a MC to EF adapter and play with that as others mentioned. But there are inexpensive macro lenses for the EF mount which would work better if your trying to get 1:1 macro.
    Sigma makes one that is a bit of an older EF mount lens that you can pick up for about $130 used if you want a inexpensive option.
    https://www.ebay.com/b/Sigma-50mm-Macro-Canon/3323/bn_7023416079
     
  7. Paton

    Paton New Member

    Joined:
    Jun 19, 2020
    Messages:
    7
    Equipment:
    Canon700D, Canon800D, Sigma 150x600 telephoto lens
    Thank you for that info. I will look into your suggestion
     

Share This Page