Canon T6i astrophotography and/or film making

Discussion in 'Technical Troubleshooting' started by achanakbhayank, Dec 13, 2018.

  1. achanakbhayank

    achanakbhayank New Member

    Joined:
    Dec 13, 2018
    Messages:
    6
    Hi, just recently purchased a T6i and astrophotography and cinematic scenes are going to be primarily what I use it for. I’m using the standard 18-55mm that comes with it and I don’t plan on upgrading that for the time being. Can anyone with experience in either of these help me get started? Tips, settings, examples of photos/videos, or anything else would be greatly appreciated. Thanks!
     

  2. Craig Sherriff

    Craig Sherriff Well-Known Member Site Supporter

    Joined:
    Apr 25, 2017
    Messages:
    3,173
    Location:
    Tasmania, Australia
    Equipment:
    60D, 10D, 50D 1dmark3, T70, AV1, lenses ranging from 28mm to 600 mm, canonet Junior, Canonet QL 25, Mamiya C3 and 3 lens sets,Mamiya 645 pro TL and 3 lenses. Pentax MG and various lenses, Toyoview 4 * 5 inch large format camera,Calimat C1 8*10 inch ultra large format camera.
    I have only a limited amount of experience in astrophotography but a lot more in videoing and would suggest that you lookup what you need to know on Youtube as I find this is one of the better sources of information,
     
  3. johnsey

    johnsey Site Moderator Staff Member Site Supporter

    Joined:
    Apr 21, 2017
    Messages:
    2,133
    Location:
    Fargo, ND
    Equipment:
    5dMk4, 5dsR, 5dMk2, 20D, 70-200 2.8L IS, 100mm 2.8 Macro USM, 50mm 1.4, 85mm 1.8, 17-40mm 4.0L, TS-E 24mm 3.5L II, Rokinon 14mm 2.8; Pixma Pro-100
    Some basic tips would be to shoot the sky with a wide aperture, in you lens case 3.5. I would shoot in manual mode set a longer shutter speed something around 30 seconds, and try to keep your ISO as lower to reduce digital noise. If you really get into shooting astrophotography I would suggest a ultra wide fast lens, few extra MM will make a big difference. The Rokinon 14mm i have is 2.8 so nice and wide, and quite ideal for this. Its manual focus which I honestly prefer as you will want to fine tune, so I would shut off auto focus anyway so the shutter button doesn't change the focus. I got the one with the chip so I can get focus confirmation when I want it.

    Oh and get a remote so you can trigger the shutter that way. You do not want to introduce shake to the image by pressing the shutter.
     

Share This Page