Canon EOS R5 noise

Discussion in 'Canon EOS R Series' started by EdSafari, Nov 21, 2021.

  1. EdSafari

    EdSafari New Member

    Joined:
    Nov 1, 2021
    Messages:
    2
    Equipment:
    Canon AEOS R5, Canon RF 100-500mm
    I recently obtained a R5 but seem to be struggling with noise shown in the RAW file in LR even for low ISO (e.g. ISO 800). The same image on DPP shows hardly any noise. I also tried converting to DNG and importing that to LR but it still shows too much noise. Below is the .CR3 image on LR at 100% followed by the same image in DPP. Is this a LR or R5 issue? Do I need to run all images through DPP (export to JPG) before editing in LR? (I use Manual Auto ISO). Please help.

    upload_2021-11-21_14-20-15.png

    upload_2021-11-21_14-20-30.png
     

  2. John L

    John L Active Member

    Joined:
    Jul 10, 2019
    Messages:
    110
    I suspect it is down to the difference between software produced by the same people as make the camera and the lenses and 3rd party software which has to try and reverse engineer the files to get an acceptable result.
     

Share This Page