60D: can't disable RAW quality

Discussion in 'Canon EOS Digital SLRs' started by faithie999, Feb 17, 2023.

  1. faithie999

    faithie999 New Member

    Joined:
    Feb 17, 2023
    Messages:
    2
    on the "quality" menu, the RAW resolution (off, RAW, MRAW, SRAW) is supposed to be selectable using the "wheel", and the JPEG resolution is selectable with the arrow keys.
    on my 60D, both the wheel and the arrows change the JPEG setting, but neither will change the RAW setting.

    I guess the good news that it is stuck on RAW rather than no RAW, but I sure would like to disable the RAW selection except when I need it.

    I just performed a firmware update, but no change on the ability to set RAW.

    any ideas?
    thanks
    Ken
     
    faithie999, Feb 17, 2023
    #1

  2. johnsey

    johnsey Site Moderator Staff Member Site Supporter

    Joined:
    Apr 21, 2017
    Messages:
    2,134
    Location:
    Fargo, ND
    Equipment:
    5dMk4, 5dsR, 5dMk2, 20D, 70-200 2.8L IS, 100mm 2.8 Macro USM, 50mm 1.4, 85mm 1.8, 17-40mm 4.0L, TS-E 24mm 3.5L II, Rokinon 14mm 2.8; Pixma Pro-100
    Are you using rear wheel or top wheel?
     
    johnsey, Feb 17, 2023
    #2
  3. faithie999

    faithie999 New Member

    Joined:
    Feb 17, 2023
    Messages:
    2
    good call! I was using the rear wheel. I guess it's been too long since I first set it to RAW!

    thanks!!

    Ken
     
    faithie999, Feb 17, 2023
    #3

Share This Page